Citrus Table Set – Free sewing patterns



Fabric: white, patterned; yellow, two shades; orange, two shades; green, scrapsWadding l Iron-on interfacing, lightweightWater erasable penAcid-free glue stick

Make the lemon placemat

Download and print the templates from Cut out all eight segments from the paler yellow batik print fabric. Snip a 25cm diameter circle from white patterned fabric and back it with the interfacing. Glue the segments in place with acid-free glue onto the white fabric as shown, so that there are equal gaps in between and an equal border around the outside. Clip away the pips from the white fabric and glue in place.

Cut out a 29cm diameter circle from the brighter yellow fabric. Place the segmented piece in the middle and pin. Using a dark ochrecolored thread, stitch around the segment and pip pieces twice, just in from the raw edges and sew the lattice detail onto three of the segments. Stitch twice around the edge of the white circle with the same thread. Iron on the reverse.

Lay the sewn piece right sides together with a circle of the bright yellow fabric, which is cut slightly larger, onto a piece of wadding cut slightly larger and pin together. With a matching thread, stitch a 0.5mm seam all the way around, leaving a gap for turning. Use pinking shears to cut away the excess fabric and wadding almost up to the line of sewing. Turn right side out, close the gap by hand stitching and iron on reverse.

Machine quilt onto the white fabric using the ochre thread in between and around all the segments. Using a matching thread, sew around the edge of the placemat, just in from the edge and around the raw edge of the white fabric.

Stitch an orange placemat

Using the paler orange batik fabric for the segments and the darker orange for the peel, repeat the instructions for the lemon placemat.

Make a lemon coaster

Download and print the templates from Cut out the lemon in one piece and place onto bright yellow fabric, snipping a 1cm border all the way around. Cut the paper template into two pieces along the inner curved line and use the oval cross-section to cut one the same size from the white patterned fabric. Back with interfacing, then pin it onto the main bright yellow fabric so there is a 1cm border of yellow along the outer curved edge. Using ochre thread, sew around the oval edge and iron on reverse.

Snip the individual segment pieces out of the oval paper cross-section. Use them to cut out the segments in pale yellow batik fabric. Use the glue to hold in place on the white patterned fabric. Allow to dry, then use the same thread to stitch each segment in place.

Pin the finished front right sides together with a piece of bright yellow fabric cut slightly larger with a piece of wadding underneath. Sew a 5mm seam, leaving a gap for turning, then snip away all excess fabric and wadding close up to the stitch line. Turn right side out, close the gap, then iron.

To finish, machine quilt the inner curve on the yellow fabric in ochre thread and sew around all the segments on the white fabric.

Sew an orange coaster

Download and print the templates from Cut two from dark orange fabric, turning the template over for the second. Cut the highlight pieces from light orange and the white fabric, then stitch them in place as shown with a dark orange thread. Iron on reverse and set aside.

Cut a front and back from the green fabric using the leaf template. Pin them right sides together with a piece of wadding underneath and sew the 5mm seam all around, making sure to leave the bottom unstitched. Snip away all excess close to the stitch line, turn right side out and iron. Topstitch around the edge in green thread and sew a central vein.

Pin the orange front and back right sides together with a piece of wadding underneath. Leave the top unstitched as indicated on the template by the two lines and sew a 5mm seam all the way around. Clip excess fabric away and turn right side out. Place the raw bottom edge of the leaf inside the gap left, then topstitch the orange all the way in dark orange thread.